Recent Entries

• Medical Mould-Syringe Mould Cooling System Structure

  by krista medicalmould August 12, 2020
  The design of the injection mould cooling system is often regarded as a minor issue. Not enough attention has been paid to the size and structural design of the cooling system. Unreasonable cooling system design will cause internal stress for small plastic parts, and deformation and even stress...

• How To Use: Three Way Stopcock ?

  by krista medicalmould August 2, 2020
  Click on the connector with 2 female Luer ports and a male Luer lock. 3 ports have been capped. Color studs are provided, which can be fixed for color coding. Usually the faucet is blue or red, indicating venous or arterial use respectively. Some plug valves have been connected to extension pipes. ...

• Medical Mould-Mould Processing: 5 Things

  by krista medicalmould July 27, 2020
  In the process of mould processing, if you want to become an injection moulded part, then basically this process is relatively complicated. In fact, more process parameters will be considered during mould processing. Of course, these process parameters must be guaranteed. All are to meet m...

• Structural Principle Of Three Way Stopcock

  by krista medicalmould July 20, 2020
  Transparent appearance, increase the safety of infusion, and help to observe the exhaust situation; Easy to operate, can rotate 360 ​​degrees, the arrow indicates the flow direction; Does not interrupt fluid flow during conversion, does not produce vortex, and reduces thrombosis   The medic...

• Medical Mould-About Plastic Mould Processing

  by krista medicalmould July 8, 2020
  With the continuous improvement of the processing level of plastic moulds, more and more companies are able to produce plastic films with good quality. The so-called injection mould refers to a variety of processes such as compression moulding, injection moulding and blow moulding, and is used ...

• Medical Mould-What Is Medical Precision Injection Mould?

  by krista medicalmould June 29, 2020
   Transmission and compression moulding require equipment at 250 to 2000 pounds and 245°F to 485°F. It is believed that the traditional method of temperature range, pressure operation, transmission and compression moulding methods requires the rubber pre-roller to be pre-mixed separately...

• Medical Mould-The Importance Of Materials For Mould Processing

  by krista medicalmould June 24, 2020
  There are many areas where the use of moulds is indispensable. This is because the use of moulds can indeed bring good performance and help. It can achieve good auxiliary effects for areas in need, and can also improve the variety of products. In short, the production efficiency can really bring goo...

• Medical Mould-About Medical Plastic Choice

  by krista medicalmould June 21, 2020
  There are several grades of plastic that can be used for injection moulding of medical devices and the development of medical device prototypes. Each material has unique properties that determine its performance in the intended application and operating environment. Factors to consider when choosing...

• Vaginal Speculum Mould-Efficacy Of Vaginal Speculumtherapy

  by krista medicalmould June 17, 2020
  Vaginal Speculum  are tubular devices used to stretch the vagina. They are usually made of plastic and come with kits of various sizes. You can get the kit at the clinic or you can buy it yourself. The kit includes dilators of different sizes, ranging from small (about the size of a finger) to ...

• Syringe Mould-How To Save: Syringe Mould?

  by krista medicalmould June 3, 2020
  The plastic syringe is mainly composed of five parts: a jacket, a core rod, a piston, a positioning ring and a protective cap. It is made of imported raw materials and is produced by an injection moulding process. The syringe is mainly used to hold veterinary drugs and inject animals. The main steri...