Prepare standard test card and test tube;
2. Prepare to wipe the long strip of Chinese desktop xrd;
For the Chinese desktop xrd that has been used, the long strip of cloth is dampened with water and wrung out to adjust the sensitivity to the lowest level. Start the [url=http://www.tongdatek.com/xrd/]China benchtop xrd[/url]and let it run. Use the long strip to straighten the belt and press the belt. The dirt, so let the conveyor run a few times until the conveyor belt is free of dirt. Then stop, wash the long cloth and wring it out, try to pass the long cloth under the conveyor belt, grab the two belts with both hands, and start the machine to run to wipe the dirt on the back of the conveyor belt.
First: After wiping clean, the Chinese desktop xrd sensitivity is tested by the nine-point test method. First, the standard test card is placed directly on the conveyor belt to start the Chinese desktop xrd. The Chinese desktop xrd can detect the detection card and issue an alarm and stop. Go back to normal.
Second: Next, insert the standard test card into the middle of the test tube, and insert the test tube embedded with the standard test card into the running Chinese desktop xrd conveyor belt. The Chinese desktop xrd can detect the test card and send the alarm back to normal.
Third: Next, insert the standard test card into the highest point of the test tube, and put the test tube embedded in the standard test card into the running Chinese desktop xrd conveyor belt. The Chinese desktop xrd can detect the test card and send an alarm and stop the machine backwards. It is normal.
After the above three test methods can detect the detection card and the alarm stops backwards, the Chinese desktop xrd can be used normally. The above Chinese desktop xrd sensitivity check is performed every three hours, and the verification results are recorded in writing to facilitate the customer's inspection.
If the verification by the nine-point test method is found, the sensitivity is not up to the customer's requirements, and the sensitivity of the Chinese desktop xrd can be increased. If the sensitivity of the Chinese desktop xrd is still not up to the customer's requirements, it is recommended to contact the supplier to solve or replace the machine.
Prepare standard test card and test tube;
2. Prepare to wipe the long strip of Chinese desktop xrd;
For the Chinese desktop xrd that has been used, the long strip of cloth is dampened with water and wrung out to adjust the sensitivity to the lowest level. Start the [url=http://www.tongdatek.com/xrd/][u]China benchtop xrd[/u][/url]and let it run. Use the long strip to straighten the belt and press the belt. The dirt, so let the conveyor run a few times until the conveyor belt is free of dirt. Then stop, wash the long cloth and wring it out, try to pass the long cloth under the conveyor belt, grab the two belts with both hands, and start the machine to run to wipe the dirt on the back of the conveyor belt.
First: After wiping clean, the Chinese desktop xrd sensitivity is tested by the nine-point test method. First, the standard test card is placed directly on the conveyor belt to start the Chinese desktop xrd. The Chinese desktop xrd can detect the detection card and issue an alarm and stop. Go back to normal.
Second: Next, insert the standard test card into the middle of the test tube, and insert the test tube embedded with the standard test card into the running Chinese desktop xrd conveyor belt. The Chinese desktop xrd can detect the test card and send the alarm back to normal.
Third: Next, insert the standard test card into the highest point of the test tube, and put the test tube embedded in the standard test card into the running Chinese desktop xrd conveyor belt. The Chinese desktop xrd can detect the test card and send an alarm and stop the machine backwards. It is normal.
After the above three test methods can detect the detection card and the alarm stops backwards, the Chinese desktop xrd can be used normally. The above Chinese desktop xrd sensitivity check is performed every three hours, and the verification results are recorded in writing to facilitate the customer's inspection.
If the verification by the nine-point test method is found, the sensitivity is not up to the customer's requirements, and the sensitivity of the Chinese desktop xrd can be increased. If the sensitivity of the Chinese desktop xrd is still not up to the customer's requirements, it is recommended to contact the supplier to solve or replace the machine.
