Notifications
Understand the air duct cleaning process to make sure that you've cleaned the duct well enough, and surely breathe unpolluted air. Be familiar with the air duct cleaning process to be sure of the caliber of air that gets to your lungs. As an example, a sealant for moldy growth is not just a bad solution, but in addition may aggravate the problem.
Inspect Just before Cleaning
A routine system check into the air inflow system gives background information of the ductwork and ventilation involved; additionally, it helps to spot problems, if any, in the air movement system. Your air duct cleaning company may suggest sealing duct air leaks; https://energyhomeservice.ca/local/duct-cleaning-north-york/ this truly saves energy and helps decrease your utility bills. A blocked filter might be identified and replaced; high-efficiency pleated filter or an electrostatic filter may replace a fiberglass one. An assessment can result in the detection of a mold problem that really needs to be sorted out before you begin the air duct cleaning processes. If your ductwork consists of sturdy sheet metal ducts, a biocide might be requested sanitation; understand that you can't make use of a biocide on a fiberglass ductwork or on a steel duct with fiberglass lining.
Create Negative Pressure
Vacuum cleaning, that produces negative pressure, uses compressed air to get rid of any dirt and debris from the system. It is obviously safe to exhaust the dust articles to the outdoor air; any indoor exhaust must make use of a HEPA-filtered vacuum. Sometimes, the whole system is susceptible to negative pressure to dislodge the dirt and debris, before any mechanical cleaning.
Clean Ductwork
Clean the conduits that run through the system. Cleaning involves using specialized tools, like nylon brushes or cable driven brushes, along with a high-powered vacuum on the supply and return element of the system. For fiberglass lined ducts or fiberboard ducts, use soft-bristled brushes. A covered air duct should not get wet; when it gets wet or moldy, don't attempt cleaning because replacing is the greatest solution. Return registers usually pull in polluted air and gets dusty; these could easily be removed and cleaned, or simply just vacuumed. Sealants may be used to fix damaged fiberglass insulation or to create a duct air tight; apply sealants only after completing the air duct cleaning process.
Clean Other Components
Ask your qualified company to completely clean all aspects of your heating and cooling system-the heat exchanger surface, sides of the cooling coil, coil fins, coil drain pan, plenum, cabinet interior, combustion chamber, humidifier and blower blades. Dryer vent cleaning also prevents possible fire hazard. Know that any asbestos containing equipment needs to be handled by specially trained and equipped staff. An EPA approved sanitizer can be utilized to completely clean the interiors of the ducts and the ventilation system; please be informed about medical and safety issues concerning the aspects of the registered antimicrobial products.
Check Result
You are able to do a random visual check for the current presence of dirt on any your supply and return ducts, and make sure that the air duct cleaning process is a thorough one. Check that most the air vents--the registers, grilles and diffusers look clean, and have now been reattached in position. Also check the machine operation post-cleaning, in the heating and cooling modes. Know your air duct cleaning process, and ensure that the indoor air that you inhale should indeed be of good quality.