Let's talk!

Automobile Press Parts Supplier Teaches You How To Care For Par

• Posted by otsed talex April 24, 2019 Filed in Other #Automobile Press Parts  249 views
  click to rate

   

  In order to reduce the unnecessary damage of auto parts and extend the life of the car, we need to carry out daily maintenance of the auto parts. So, what do you need to pay attention to in the daily maintenance of Automobile Press Parts?
  Daily maintenance precautions for auto parts
  Check the battery battery electrode wiring, where it is easy to oxidize to produce green matter, which is easy to cause battery loss. Check the fixing degree of the battery. When the line is close to the lower line, add the electrolyte or distilled water to the high line in time. Be sure to keep the electrolyte between the upper and lower limits. If it is not used for a long time, the positive and negative cables of the battery should be taken off, re-wired and started after half a month, and pay attention to timely charging.
  2 Check if the car engine needs to change the oil, whether the quality of the oil changes or so. Clean up the dirt in the engine water tank in time, and the dirt will easily hinder the heat dissipation of the engine, which will cause engine damage.
  3 Check the brake system. If there is any abnormality, it should be replaced or repaired in time. The brake fluid needs to be replaced every two years. If the brake fluid is close to the lower limit or lower than the lower limit, it will indicate that there may be leakage in the system or excessive wear of the brake shoes. It should be repaired in time.
  4 Check if the engine piston temperature is too high, which may lead to overheating and melting, and hold the cylinder; check whether the rubber seal, triangle tape, tires, etc. are overheated, easy to premature aging, performance degradation, shorten the service life; check the starter and generator Whether the coil of electrical equipment such as regulators is overheated, it is easy to burn and scrapped; the bearing of the vehicle should maintain proper temperature. If it is overheated, the lubricating oil will deteriorate quickly, eventually causing the bearing to burn and the vehicle to be damaged. When these parts are overheated, they should be cooled down in time.
  5 Check if the fuel filter, oil filter, air filter, hydraulic oil filter and various filters are dirty, which will result in poor filtration effect and excessive impurities entering the oil cylinder. It will aggravate the wear and tear of the machine and increase the possibility of failure; if it is seriously blocked, it will also cause the vehicle to work normally. Parts such as the radiator fins, the air-cooled engine block and the cylinder head fins, and the cooler fins are too dirty, resulting in poor heat dissipation and high temperatures. Therefore, such parts must be cleaned and maintained in a timely manner.