Groups

• BOPP Labels Are Compounded And Cured

  When direct glazing cannot reach the required brightness, supercalendering is a good method. Super calendering and laser imprint transfer adopt the same principle, i.e. using the flatness of BOPP labels https://www.print-labels.net/product/plastic-labels/bopp-labels.html itself and its low surface energy characteristics, the printed gloss oil is compounded with BOPP labels by using a cold ironing device, then cured, and then the BOPP labels is rewound and collected by using the winding system of the cold ironing device for next reuse. Since the surface energy of the BOPP labels is only 32 dynes, varnish cannot be attached to BOPP labels at all. However, as it is compounded with the flat BOPP labels and cured with a UV lamp, the cured gloss oil surface is as flat and glossy as the BOPP labels. The precautions of BOPP supercalender are similar to those of cold ironing. However, since the BOPP labels are made of transparent material, the front and back sides need to be marked correctly to prevent the wrong side from being used. In general, one side of the BOPP labels will be corona treated to be suitable for compounding, but this side is not suitable for supercalendering. In addition, neat winding is an essential prerequisite for BOPP labels to be reused. When BOPP labels can be reused, the cost of supercalendered can be minimized. The heat transfer film https://www.print-labels.net/ is also our hot product, you can click to view.
• Print Label Suppliers Can Meet Market Requirements

  At present, print labels supplier(PRINT-LABELS) https://www.print-labels.net/ are widely serving various electronic and medical machinery industries, daily chemical industries, logistics, supermarket industries and so on. 1. Electronic industry Electronic digital equipment products, electronic devices have now spread to every corner of people's lives. The further popularization of household appliances and communication tools has made the development of the electronic industry unprecedented in scale. Labels can be used on computers, electrical appliances and mobile phones. 2. Pharmaceutical Industry With the promulgation of GMP certification standards by the state, the pharmaceutical industry has higher requirements for the standardization of drug packaging, and further requirements are being made for the hygiene and aesthetics of packaging. On the premise that the adhesive material meets the hygiene standard, the self-adhesive label can well meet the needs of drug packaging. On the one hand, the production requirements of the pharmaceutical industry are relatively high, and the flow-line operation is fast. Many medicine bottles need automatic labeling to meet the requirements during labeling. On the other hand, self-adhesive materials are suitable for various printing methods, with clear pictures and texts, neat and strong adhesive effect, so that self-adhesive labels can meet the requirements of the market for drug packaging. 3. Supermarket and Logistics Industry Self-adhesive labels are already essential in supermarkets and the logistics industry. In every corner of supermarkets, whenever you see a product, there will be a self-adhesive label on it. Nowadays, many express delivery companies have gradually replaced the express delivery list with self-adhesive labels. 4. Daily chemical industry Self-adhesive labels have been widely used in daily chemical industry. It is understood that, at present, the proportion of domestic daily chemical products using self-adhesive labels as labels exceeds 30%, while according to statistics, the self-adhesive labels on the domestic market are still maintaining a rapid growth momentum in the daily chemical industry and are being applied more widely. Label materials will also develop to a high level and diversified direction. If you are interested in our products, you can click shrink sleeve labels https://www.print-labels.net/product/plastic-labels/shrink-sleeve-labels.html to learn more information.
• Print Labels Supplier Business Channel

  Classification and use Product sign A, car logo: used for car front and rear signs, common English, Chinese, digital, brand LOGO, such as Volkswagen, Honda, Toyota and other car signs (not detailed here). B, electrical label: such as TV, refrigerator, stereo, DVD, amplifier, air conditioner and other nameplate signs. C. Mechanical nameplate: A label used to identify or explain the attributes of mechanical products. D. Signage for motorcycles, electric vehicles, and mopeds: Mailboxes, shields, side covers, head covers, models, lamp housings, front and rear billboards are mainly used. E, furniture signs, mainly used desks, wardrobes, coffee tables, dressing tables and other supplies F. Door industry signs: used for anti-theft doors, wooden doors, decorative doors, glass doors, soundproof doors and windows, etc. G, luggage label: used for travel bags, leather bags, equipment bags, photography cases and other products. Commercial signage Generally refers to the signs set up for commercial purposes, and various types of signs are provided by print labels suppliers. A. Medals: collective name for honor signs. Such as "advanced collective, authorized card", "special dealer" and so on. B. Navigation signs: signs for identifying directions, matters needing attention, and reminders, such as "road signs". C. Public signage: A signage located in a public place to announce information to the public or to publish certain information. Routine maintenance In simple terms, plastic signs can be maintained in the following ways: Clean Acrylic products are easily abraded and scratched if they are not specially treated or hardened. Therefore, for general dust treatment, it can be washed with feather duster or water, and then wiped with a soft cloth. If the surface is oily, you can add water with a soft detergent and scrub it with a soft cloth. Waxing For bright and beautiful products, you can use liquid polishing wax and wipe it with a soft cloth evenly. Stick If the product is damaged accidentally, use IPS adhesive glue / adhesive dichloromethane type adhesive or quick-drying agent followed by it. polishing If the product is scratched or the surface wear is not serious, you can try to use a polishing machine (or car waxing machine) to install a cloth wheel, soak an appropriate amount of liquid polishing wax, and evenly polish it to improve it. Production of acrylic signage.
• Use Of Shrink Sleeve Labels

  shrink sleeve labels still belong to the category of heat shrinkable film in essence, but their main application direction is the label rather than the packaging. For example, the outer label of some beverage bottles is a shrink sleeve label. And the outer transparent packaging similar to the bowl surface is the traditional shrink film sleeve. Shrink film sleeve label is a new type of label printed on plastic film or plastic tube. It mainly includes common heat shrinkable film types such as PE, PVC, PET, and has the following characteristics: 1) The shrink film sleeve label is easy to process, the package is sealed, anti-pollution, and the product has good protection; 2) The shrink film sleeve is close to the product, the packaging is compact, and the product shape can be displayed, so it is suitable for irregular products that are difficult to package; 3) When labeling shrink film sleeve labels, no adhesive is needed and the same transparency as glass can be obtained; 4) Shrink film sleeve labels can provide 360-degree decoration to packaging containers, and product information such as product descriptions can be printed on the labels, so that consumers can understand the performance of the product without opening the package; 5) The printing of shrink film sleeve labels belongs to film inner printing, which can protect the imprint, and the label has better wear resistance. Since the shrink film sleeve is a thermoplastic film that is stretched and oriented during the production process and shrinks by heat during use. Therefore, before the design of the surface pattern, the horizontal and vertical shrinkage of the material, as well as the allowable deformation error in each direction of the decorative graphics after shrinking, can be taken into account to ensure the accurate reduction of the pattern, text, and barcode that is shrunk to the container. Because it belongs to the category of heat shrinkable film, its material and characteristics are not different from ordinary heat shrinkable film, but the printing is more exquisite.
• Convenient And Fast In Mould Label

  Taizhou Gete Color Printing is a heat transfer film and label supplier as well as a designated printing trademark unit in Taizhou city, striving to provide customers with the best quality services.
• Notes On The Use Of Product Bottle Labels

  Features of product identification Product identification is an information indicator formed during the long-term production and sales of products. Therefore, product identification should usually be accompanied by the product. But not all products need product identification, such as naked food and some naked products. In addition, the product identification shall truthfully record the relevant information of the product, and there shall be no false publicity or exaggeration, otherwise, the producers and sellers of the product identification will bear similar legal responsibilities as the false publicity products. In addition, product identification has a strong purpose. Product identification is to inform consumers about the production status, main functions and corresponding quality issues of this product, and has the purpose of attracting consumers to buy the product. Thirdly, in order to reflect the quality and characteristics of the product, each product logo is matched with the product. It can be said that each product logo has its own unique identity, just like a human fingerprint, two different Products cannot have the same product logo. In addition, the identification of the product does not come out suddenly, it is produced along with the process of step by step production of the product. There are requirements for product identification in these processes, including the production, assembly, and production of products. Finally, product bottle labels must be authentic and must have a fairly objective description to reflect the corresponding characteristics of the product. After all, the product logo is not an advertisement. It promotes the product based on the characteristics of the original product. First priority.