Bakelite Parts To Do Daily Maintenance

  • Leader
    February 17, 2020 5:07 PM PST
    The following aspects should be paid attention to when processing stretched [url=https://www.nbstarlite.com/]Sheet Metal Parts[/url]:

    Before installation and use of the mold for processing stretched metal plate parts, it should be strictly checked to remove internal stolen goods and check whether the guide sleeve and the mold are well lubricated.

    In the die for processing the stretched metal plate parts, the cutting edges of the male die and the female die should be stopped when worn and sharpened in time, otherwise, the wear degree of the cutting edges of the die will be rapidly enlarged. Increase die wear, reduce the quality of metal plate parts and damage the service life of the die;

    To ensure the service life of the stretching parts of phenolic plastic parts, the springs of the dies should also be replaced regularly to prevent the quality of stretching metal plate parts caused by damage of the springs for too long.

    In order to ensure the quality of the stretched metal plate parts, reduce the cost and prolong the service life of the die, the die must be used correctly and maintained reasonably, and the "three checks" system for the [url=https://www.nbstarlite.com/product/bakelite-parts/]Bakelite Parts[/url] die must be strictly implemented, i.e. before, during and after use. And do a good job in daily maintenance and repair work