Laboratories are places where experiments and chemical research are provided. Many people in laboratories are familiar with them. When they go to school, many chemical experiments are completed in laboratories. Of course, the school's laboratory safety factor is very good. [url=https://www.wsdty.com/product/copper-acetate/]Copper Acetate Manufacturers[/url] remind everyone that before entering the laboratory, they must carefully read the rules about the laboratory and observe them. Safety Precautions for Using [url=https://www.wsdty.com/]Copper Acetate[/url] in Chemical Laboratory;

1. White coats and gloves must be worn during the experiment; Strong acid and caustic soda are highly corrosive. Don't splash on skin and clothes.
2. When concentrated nitric acid, hydrochloric acid, sulfuric acid, perchloric acid, ammonia water and other toxic and odorous gases are used, the experiment should be carried out in a fume hood or under ventilated conditions.
3. When moving or opening a large bottle of liquid medicine, do not place it directly on the concrete floor. Use blankets or straw mats. If covered with plaster, it can be opened after softening. It is forbidden to knock or hammer. Prevent cracking.
4. When opening the bottle stopper of volatile reagent, do not aim the bottle opening at your face or other people, and do not aim your nose at the bottle opening of reagent.
5. When using reagents, the stopper should be placed in a clean place and the bottle cap should be closed immediately after use.