Let's talk!

Is Metal Stamping Process safe?

  • click to rate

    Is Metal Stamping Process safe?

    Metal stamping is a manufacturing process that employs a specialized press, as well as tool and die set, to form sheet metal into a specified shape and size. Industry professionals employ metal stamping processes to produce a wide range of industrial parts and products. However this process needs more caution in the production.To get more news about Stamping parts, you can visit tenral.com official website.

    In fact, metal stamping is not as dangerous as it is in the phenomenon, but any incident of punching injury occurs for a reason. On the one hand, it is the reason for the precision stamping manufactures, and on the other hand the reason for the operation of the workers. As long as both are done well, stamping is still very safe. Today, through our more than ten years of stamping experience, we will analyze how to eliminate the danger of stamping for those who plan to engage in stamping work.
    7 tips that metal stamping manufacture should pay attention.
    In fact, stamping can be viewed in the same way as logistics. The boss provides a car for the driver to drive. At the very least, he must provide the driver with a fully qualified car. The same is true for stamping. When a factory operates a punching machine, how can even the punching machine not be fully qualified, and where should safety start? There are mainly the following requirements for equipment:

    1. The punch runs well lk

    A good punch is the foundation of safe production. The lubrication of the punch must be normal; the copper bushes must not be excessively worn; the tightness of the brake must be within a normal range; the clutch and control system are flexible; the bolts of each part must not be loose;
    2. Install safety grating

    After the safety grating is installed, if the stamper's hand or other items that affect safety enter the dangerous area, the punch will be stopped in an emergency; in the shutdown state, the punch cannot be started.
    3. Reasonable switch design

    It is necessary to design two start switches and an emergency stop switch, and the two start switches must be a certain distance apart, as long as the stamper presses the two start switches at the same time to start the machine; the emergency stop switch cannot be too far away from the stamper. Otherwise, when a situation arises, the worker cannot stop the punch immediately.

    4. Reasonable design of stamping die

    If the punch is the first element of safe production, then the stamping die is the second element. The production of stamping parts relies on stamping dies, so the reasonable design of stamping dies plays a vital role in safety.

    Whether it is convenient to discharge and return the material smoothly all affect the safety of the factory during operation. When designing the mold, it must be possible to ensure that the factory can easily use tools to discharge and unload.

    5. Safety tools must be used

    During the stamping process, it is absolutely forbidden to let the hand enter the working area of ??the mold, which requires the use of safety tools to complete the work of unloading and unloading. The safety tools that are often used now are magnet type, suction cup type and tweezers.

    6. Reasonable noise reduction measures

    Under the influence of the noise of the punching press for a long time, the concentration and mental state of the factory will continue to decline. Reasonable noise reduction measures can not only ensure the mental state of the stamping workers, but also be responsible for the health of the workers!

    7. Establish a safety management system and punch operation manual

    Stamping factories must carry out safety training for stamping workers from time to time, so that the concept of safe production can be deeply rooted in the hearts of the people. Help stampers to establish safe operating habits