Appearance Maintenance Of Table Mould

  •  

    As a professional Plastic Mould Factory, it is recommended that customers do the following aspects of table mould maintenance:

    1. Daily maintenance of table mould, maintenance of various moving parts of mould, such as thimble, row position, guide post and guide sleeve, etc., often add lubricating oil, and clean the mould surface and drain the cooling water channel.

    2. Regular maintenance of the table mould, including daily maintenance, cleaning the exhaust groove, exhausting the trapped gas and blackening parts, and correcting the damaged and worn parts, etc.

    3. Maintain the appearance of the table mould, and paint the outer side of the mould to avoid rusting. After injection moulding, the fixed mould and the moving mould should be coated with antirust oil, and the mould should be closed tightly to prevent dust from entering the cavity.

    Chair Mould is also our hot product, you can click our website: https://www.furnituremould.com/