For the chain drive with combine chains(GETECHAIN) https://www.getechain.com/, even if the chain and sprocket are designed to meet the use conditions and environment, if the lubrication is poor, it is impossible to give full play to the design performance and ensure the service life. The combine chains have good lubrication and poor lubrication in use, and the wear amount can differ by 200-300 times. Once the lubrication is not sufficient, the pin shaft and sleeve will be worn, thus causing the meshing imbalance between the combine chains and the sprocket, noise increase, and chain-link elongation. Even cause chain breakage accidents. Poor lubrication between the roller and the sleeve will cause serious wear and tear of these parts at an early stage and make them unable to continue to be used. Therefore, it is a crucial measure to develop the performance of the combine chains to formulate a reasonable plan for selecting the viscosity of lubricating oil, the location and method of oil supply, the oil supply interval and the amount of oil to be filled, and to fully lubricate the friction surfaces of the combine chains. You can receive the following effects: 1. Reduce the wear of friction pair; 2. Reduce power consumption; 3. Gluing caused by adhesive wear occurs; 4. In addition to overheating caused by friction; 5. Verify smooth transmission and prolong service life. If you are interested in our products, you can click China chain supplier https://www.getechain.com/ to learn more information.