Let's talk!

Automobile Press Parts Anti-roll Bar

  • click to rate

     

    The anti-roll bar Automobile Press Parts are not an ordinary stick, but it has a very important position, especially for the handling of the car.
    The anti-roll bar is a bar that prevents lateral tilting, so it is also called a laterally stable balance bar. Its role is self-evident, preventing the car from tilting laterally when turning.
    Reducing the inclination can make the car not easily roll over, and it can also make passengers sit more comfortable.
    The material of the anti-roll bar is mostly composed of springs, and the length is inversely proportional to the hardness. If both ends of the anti-roll bar move at the same time, then it has no effect, that is, it loses its meaning, so it cannot be moved at the same time to prevent it.
    Explain with the knowledge of physics that its work requires the equal and opposite forces on both sides to be mutually constrained.
    Good control is essential if you want a better experience. It is no exaggeration to say that the anti-roll bar takes up the responsibility of the entire suspension system to a certain extent, and its role is not to be underestimated. In order to have more stable control of the car body, it is necessary to have a higher performance anti-roll bar. In fact, no matter what, one thing is certain that the degree of inclination of the car must exist. Even if the role of the anti-roll bar is strong, it cannot change this fact. There should be synergy between the anti-roll bar and the spring.
    The general anti-rolling resistance is controlled between 20% and 50%. If the anti-rolling resistance is too large, causing the shift of the center of gravity, it will not be worth the loss.
    The anti-roll bar is really powerful. Of course, we can't misunderstand that there is only one component in the car that can determine the degree of roll. In fact, the power that can be reversed is derived from the stroke between the shock absorber and the spring. Then, if we want to obtain a higher performance anti-roll bar, we need to modify it to make up for the original deficiencies and make targeted changes.