Let's talk!

Tongda Analysis Equipment Specific Operations

• Posted by tongda edith April 3, 2019 Filed in Business #Tongda analysis equipment  266 views
  click to rate

  Tongda analysis equipment - Metal Detector Inspection Operation Process
  
  1. Ensure that the metal detector device is stable and reliable.
  
  2. Ensure that there are no metal objects in the vicinity of the exploration head, and there is no debris above the exploration head.
  
  3. Ensure that there are no debris in the exploration hole.
  
  4. Ensure that the power cord is securely touched and grounded.
  
  5. Ensure that there are no sources of disturbance around the equipment.
  
  6. Register the main power switch. At this time, the machine starts to actively balance the calibration and self-test. The two rows of indicators are on, then gradually calm down, and the working status light is on.
  
  7. When the signal indicator of the two channels is no more than 2-3 green lights are shining, the detection can be started.
  
  8. Select the product serial number (the value of “commodity selection” recorded when commissioning the commodity material effect).
  
  9. Tap the “Start” button to start the conveyor. Place the test block on the belt and check the sensitivity to recognize that the machine works well.
  
  10. The goods to be tested are lightly placed on the conveyor belt for testing.
  
  11, once again recognize the detection sensitivity, to ensure that the practice detection sensitivity can be satisfactory for practical needs.
  
  12. Start running water detection.