Let's talk!

Factors To Consider When Choosing Inline Closure

  • click to rate

    Factors To Consider When Choosing Inline Closure

     

    Do you know the "black box" on the ground? Yes, many people who use FOC (fiber optic cable) may be familiar with it. It is called a fiber splice box, or a fiber optic splice closure. In fact, in addition to underground applications, Inline Closure is also used in antenna, harness-mounted FTTH "tap" positions where the drop cable is bonded to the distribution cable. It is typically used with outdoor fiber optic cables to provide splicing space for outdoor fiber optic cables. The fiber splice closure and the internal fiber optic tray will protect the connection between the splice fiber and the outdoor fiber optic cable.

    What factors should I know before deciding on the connector box for OSP installation?

    1) You must know if your stitching closure application is installed in the air or buried in the ground.

    2) Know your connector count and connector type - How many fiber connectors do you need to hold to close? Are they fusion joints, mechanical joints or a combination of the two? Some closures can be purchased with additional sealed ports that can be opened to accommodate new fibers that may be added in the future.

    3) Make sure the cover and application match the correct type of splice tray.

    4) Easy to re-enter - Many new closures, it can be sealed without the need for sealing tape or C-cement. This makes it easy to seal the cover and re-enter the cover when further work is required.

    5) The multi-link closure uses a compression washer made of a malleable material that provides a tight seal when the two halves of the closure are bolted together. I recommend using a cross-shaped star pattern when tightening the bolts to ensure that the pressure is evenly applied to the compression seal. Washers around the cable entry and outlet can be ordered in a variety of hole sizes to accommodate different cable diameters.

    6) Some seals have an accessory that allows the installer to fill the seal with compressed air to determine if there is any leak. The soap solution can be applied to the seams, and if the air leaks, the seams will show bubbles.

    The information about Inline Closure : https://www.greentelftth.com/basic-information-about-fiber-patch-panel.html