Let's talk!
Tools Required To Install The Inline Closure Connector
-
Tools Required To Install The Inline Closure Connector
On-site assembly of Inline Closure connectors is a fiber optic quick connector, also known as fiber optic connectors. It has no special requirements for the operating environment, and the required tools are simple and easy to carry. It is easy to operate, only needs to start the cable once and the construction speed is fast.
At present, its structure and materials have formed its own characteristics, including foreign and domestic manufacturers of quick connectors. It is structurally divided into a mechanical connection and a hot melt type. Mechanical continuous types can be divided into straight and embedded types. Straight type: The cable is stripped and worn at the end of the connector directly after cutting from the tail. There is no connection point inside the connector. Embedded: embedded in a piece of fiber embedded in the embedded chip, cable stripping, cutting and embedded fiber in the V-shaped slot of the connector docking, V-slot filled with matching liquid.
The hot-melt on-site assembly of the Inline Closure connector is actually a fiber-optic weld, but the solder joint is at the end of the connector, which is equivalent to the heat-melting to the pigtail cable, which is beneficial and does not require additional protection. However, in terms of its operation, the same use of the welder, like the case of active hot melt adhesive, is basically the same as ordinary hot melt adhesive. Hot melt connectors have drawbacks, and they exist, so there is no widely used way.
What are the advantages of assembling the Inline Closure connector on site? The fiber clamping component is made of elastic metal material, and the plastic component has no aging phenomenon; the temperature change has little influence on the retention of the fiber; in addition, the device has a anti-loose mechanism, and the device has excellent vibration resistance and drop resistance. The fiber optic abutment adopts axial bonding, the fiber optic docking, the gap between the two fiber ends is almost zero, so the connection loss is small; due to the use of the fiber matching paste, there is no fiber matching paste loss, pollution and aging; the reliability of the clamping It is also very good, and it also determines the stability of the connection is very good. In summary, there are many benefits to using field assembled optical connectors.
The information about Inline Closure : https://www.greentelftth.com/basic-information-about-fiber-patch-panel.html