Hydraulic Motor Manufacturers - Hydraulic Motor Cleaning Steps
The hydraulic motor is usually flushed before it is put into use. The purpose of the flushing is to remove the contaminants, metal chips, fiber compounds, iron core, etc. remaining in the motor. In the first two hours of
operation, even if the motor is not completely damaged, Will cause a series of failures. So the Hydraulic Motor
manufacturers explains the following steps to clean the motor oil circuit:
1. Clean the tank with an easy-to-dry cleaning solvent and remove the solvent residue with filtered air.
2. Clean all the pipes of the motor. In some cases, the pipes and joints need to be impregnated.
3. Install oil filter in the pipeline to protect the oil supply pipeline and pressure pipeline of the valve.
4. Install a flushing plate on the current collector instead of a precision valve, such as an electro-hydraulic servo valve.
5. Check that all pipe sizes are appropriate and that the connections are correct.
https://www.xjetl.com
The hydraulic motor is usually flushed before it is put into use. The purpose of the flushing is to remove the contaminants, metal chips, fiber compounds, iron core, etc. remaining in the motor. In the first two hours of
operation, even if the motor is not completely damaged, Will cause a series of failures. So the Hydraulic Motor
manufacturers explains the following steps to clean the motor oil circuit:
1. Clean the tank with an easy-to-dry cleaning solvent and remove the solvent residue with filtered air.
2. Clean all the pipes of the motor. In some cases, the pipes and joints need to be impregnated.
3. Install oil filter in the pipeline to protect the oil supply pipeline and pressure pipeline of the valve.
4. Install a flushing plate on the current collector instead of a precision valve, such as an electro-hydraulic servo valve.
5. Check that all pipe sizes are appropriate and that the connections are correct.
https://www.xjetl.com